Monday, November 26, 2012

ALTERNATING CURRENT ELECTRICAL MOTOR

http://electricisa.blogspot.com/alternating current electric motor
alternating current electric motor  using an electric current that reverses direction at regular intervals. AC electric motor has two basic electrical parts: a "stator" and "rotor"

The stator is the stationary electrical component. The rotor is the rotating electrical component rotates the motor shaft. The main advantage of DC motors over AC is that the speed of an AC motor is more difficult to control. To overcome this disadvantage, AC motors can be equipped with a variable frequency drive to increase control while reducing its speed. Motor is an induction motor is the most popular in the industry because of its reliability and easier maintenance. AC induction motors are inexpensive (half or less than the price of a DC motor) and also provide power to weight ratio is quite high (about twice a DC motor).

Types of Motor AC / Alternating Flow-Back

a. Synchronous motor. Synchronous motor is an AC motor that works at a fixed speed frequency of the system. These motors require direct current (DC) for power generation and has a low starting torque, and therefore synchronous motor is suitable for applications that start with low loads, such as air compressors, motors and generators frequency changes. Synchronous motors are able to improve the power factor of the system, so it is often used in systems that use a lot of electricity.

The main components of a synchronous motor is
• Rotor. The main difference between synchronous motor with an induction motor is that the rotor synchronous machines running at the same speed as the rotation of the magnetic field. This is possible because the magnetic field of the rotor is no longer induced. The rotor has permanent magnets or DC-excited, which was forced to lock in a certain position when confronted with another magnetic field.
• Stator. The stator produces a rotating magnetic field which is proportional to the frequency supplied.

This motor rotates at synchronous speed, which is given by the following equation (Parekh, 2003):

Ns = 120 f / P

Where:
f = frequency of the supply frequency
P = number of poles

b. Induction motor. Induction motors are the most common motors used in various industrial equipment. Its popularity is due to the design, which is simple, inexpensive and easily available, and can be directly connected to an AC power source.

Component of induction motor has two main electrical components:
• Rotor. Induction motors use two types of rotor:
- Squirrel cage rotor consists of a thick conductor rods are embedded in parallel slots plots. These bars are short-circuited at both ends by means of short-circuiting rings.
- A wound rotor has three-phase windings, double layer and distributed. Many poles as the stator. Three phases digulungi wire on the inside and the other end connected to a small ring attached to the stem as a brush attached to it.
• Stator. The stator is made of a number of stampings with slots to carry three-phase windings. It is wound for number of poles. The rolls were spaced at 120 degrees geometry.

Classification of induction motor

Induction motors can be classified into two main groups (Parekh, 2003):
• Single-phase induction motor. This motor has only one stator winding, operates with single-phase power supply, has a squirrel cage rotor, and require a tool to turn the bike. So far this bike is the most common type of motor used in home appliances, such as fans, washing machine and clothes dryer, and for the use of up to 3 to 4 Hp.
• three-phase induction motors. Rotating magnetic field produced by a balanced three-phase supply. These motors have high power capabilities, can have a squirrel cage or wound rotor (although 90% had a squirrel cage rotor), and the ignition itself. It is estimated that about 70% of the motor industry uses this type, for example, pumps, compressors, conveyor belts, power lines, and a grinder. Available in sizes 1/3 to hundreds of horsepower.

Induction motor speed

Induction motor works as follows: Electricity is supplied to the stator, which produces a magnetic field. This magnetic field moves around the rotor at synchronous speed. Rotor currents produce secondary magnetic field, which is trying to fight the stator magnetic field, which causes the rotor to rotate. However, in practice, the motor never runs at synchronous speed but the "base rate" is lower. The difference between the two speeds is the "slip / slide" that increases with increasing load. Slip only occurs in an induction motor. To avoid slip ring can be fitted a sliding / slip ring, and the motor is called "motor slip ring / slip ring motor".

The following equation can be used to calculate the percentage of slip / slide (Parekh, 2003):

% Slip = (Ns - Nb) / Ns x 100

Where:
Ns = synchronous speed in RPM
Nb = base speed in RPM

The relationship between load, speed and torque
 graph torque vs. speed three-phase AC induction motor with the current set. When the motor (Parekh, 2003):
• Start turns lights are flame high initial currents and low torque ("pull-up torque").
• Achieve 80% of full speed, the torque is at the highest level ("pull-out torque") and the current begins to drop.
• At full speed, or synchronous speed, torque and stator currents down to zero.
also read article about direct current electrical motor

ELECTRIC MOTOR


http://electricisa.blogspot.com/electric-motor
electric motor is an electromagnetic device that converts electrical energy into mechanical energy. This mechanical energy is used for, for example, rotating impeller pump, fan or blower, driving a compressor, lifting materials, etc. in the industry and is also used in household electrical appliances (such as mixers, electric drill, fans).

Mechanism of action for all types of electric motors are generally the same:
• An electric current in a magnetic field will experience a force.
• If the current carrying wire is bent into a circle / loop, then both sides of the loop, ie at right angles to the magnetic field, will get a force in the opposite direction.
• pair of forces creates playlists / torque to rotate the spindle.
• These motors have multiple loops on dynamo to provide a more uniform torque and magnetic field generated by the coil arrangement called the electromagnetic field.

In understanding an electric motor, it is important to understand what is meant by the motor load. Load refers to the rotary power output / torque in accordance with the required speed. Expenses generally be categorized into three groups:
• constant torque load, is the load which the output power varies with the speed of operation, but the torque does not vary. Examples of constant torque loads are conveyors, rotary kilns, and constant displacement pump.
• Load with variable torque, is the torque load that varies with the speed of operation. Examples of variable torque loads are centrifugal pumps and fans (torque varies as the square of the speed).
• Constant power load, a load torque change with demand and inversely proportional to the speed. An example for a constant power load tools are machines.

ELECTRIC MOTOR can be divided into two groups based on the use of electric current. the direct current electric motor and alternating current electric motors


ELECTRIC CONDUCTOR

http://electricisa.blogspot.com/electrical conductor

electric conductor  is a  liquid / solid / gas material that can conduct electricity easily.Good conductor is one that has a smaller resistivity. In general, the metal is conductive. Gold, silver, copper, aluminum, zinc, iron successive having resistivity greater. So as gold is a very good conductor, but because it is very expensive, the economic copper and aluminum are the most widely used.
Definition conductor or conductor understanding. Conductor or conductor is a substance or material which is able to deliver energy, both electrical energy and heat energy, either solid, liquid or gas. The materials that are conductors is normally used to make tools that are needed energy transfer, such as pans, irons, cable and solder.
1.1 Type Conductor Materials
The materials used for conductors must meet the following requirements:
1. Conductivity is quite good.
2. Mechanical strength (tensile strength) is quite high.
3. Length expansion coefficient is small.
4. Elastic modulus (modulus of elasticity) is quite large.
The materials used as conductors, among others:
1. Common metals, such as copper, aluminum, iron, and so on.
2. Alloy (alloy), which is a metal of copper or aluminum that were mixed in a certain amount of other types of metal, which is useful to increase mechanical strength.
3. Metal alloys (composite), ie two or more metals are combined by means of compression, fusion (smelting) or welding (welding).

1.2 Classification of conductors
1.2.1 Classification of conductors according to the material:
1. ordinary metal wire, for example:
a. BBC (Bare Copper Conductor).
b. AAC (All Aluminum Alloy Conductor).
2. wire alloys (Alloy), for example:
a. AAAC (All Aluminum Alloy Conductor)
b. alloy wire (composite), such as: copper coated steel wire (Copper Clad Steel) and steel wire coated aluminum (Aluminum Clad Steel).
3. wire wrap mixture, ie the wire windings consist of two or more metals,
example: ASCR (Aluminum Cable Steel Reinforced).

1.2.2 Classification of conductors by construction:
1. solid wire (solid wire) Berpenampang round.
2. berlilit wire (standard wire) comprising 7 to 61 solid wire, wound into one, usually layered and concentric.
3. hollow wire (hollow conductor) is a hollow wire is set to get a huge line outside the center.

1.2.3. Classification of conductors according to its physical form:
1. bare conductors.
2. insulated conductor, a conductor on the outside naked and isolated in accordance with the allotment of work stress, for example:
a. Twisted wires.
b. Cable NYY
c. Cable NYCY
d. Cable NYFGBY

1.3 Characteristics Conductor
There are 2 (two) types of conductor characteristics, namely:
1. mechanical characteristics, which indicate the physical state of the conductor which states the tensile strength of the conductor (from SPLN 41-8:1981, for 70 mm  sheathed conductors AAAC-S at a temperature of about 30  C, the maximum capacity of the conductor is to deliver current 275 A).
2. electrical characteristics, which shows the ability of the conductor to the electric current passing through it (from SPLN 41-10: 1991, to 70 mm2 sheathed conductors AAAC-S at a temperature of about 30o C, the maximum capacity of the conductor to deliver current is 275 A).

1.3.1 Electrical Conductivity
Electrical conductivity properties of the material represented by the conductivity, which is the inverse of resistivity or resistivity conductor, where the conductor resistivity is defined as:
R. A
ρ = ----------
l
where;
A: cross-sectional area (m2)
l: length of conductor (m)
Ώ: Conductor resistivity (ohm.m)
R: Conductor resistance (ohms)
ρ: conductivity

1
a = ------
ρ

Stating ease - ease of a material to carry electrical current. Unit of conductivity is (ohm meter). Conductivity is the electrical properties required in various applications as a conductor of electricity and has a very wide price range. Metals or materials that are good electrical conductor, electrical conductivity of the order of 107 (ohm.meter) -1 and vice versa insulator material has a very low conductivity, which is between 10-10 up to 10-20 (ohm.m) -1 . Between these two extreme properties, there is a semi-conductor material conductivity ranging from 10-6 to 10-4 (ohm.m) -1. In contrast to the low voltage cables, medium voltage cables for the fulfillment of the function of the conductor and the safety of the use of, or the third type conductivity properties used above all.

-------------------------------------------------- ----------------------------------------
The electrical conductivity of metals ohm meter
Silver (Ag) ............................ 6.8 x 107
Copper (Cu) ....................... 6.0 x 107
Gold (Au) .......................... .. 4.3 x 107
Aluminum (Ac) ................... .. 3.8 x 107
Brass (70% Cu - 30% Zn) ... 1.6 x 107
Iron (Fe) .............................. 1.0 x 107
Carbon steel (FFE - C) ............. 0.6 x 107
Stainless steel (FFE - Cr) ...... 0.2 x 107

Table 1. Electrical conductivity of various metals and alloys At Room Temperature.

1.3.2 Criteria for quality conductor
Conductive metallic conductivity is strongly influenced by the elements - alloying elements, major impurity or crystal imperfections in the metal, which is the third of a role in the process of manufacture of the conductor itself. Element - the element of the tour besides affecting the electrical conductivity, it will affect the properties - mechanical and other physical properties. Pure metal has better electrical conductivity than the lower purity. However, the mechanical strength of pure metal is low.
Conductor of electricity, in addition to requiring high conductivity also requires certain physical and mechanical properties that are tailored to the use of the conductor itself.

In addition to technical problems, the use of metal as a conductor was also largely determined by the economic value of the metal community. Thus a compromise between technical and economic value of metal to be used absolute attention. Termurahlah compromise value that will determine which metal will be used. At this time, Metal Copper and Aluminum is a metal that was selected among other types of metal conductors that meet the technical compromises cheapest economical.

Of the types of metal conductors in Table 1. above, copper is a conductor of the longest used in the field of electricity. In 1913, by the International Electrochemical Commission (IEC) set a standard that indicates conductivity copper wire which was then known as the International Annealed Copper Standard (IACS). The standard states that for copper wire that has been softened by annealing process (annealing), has a length of 1m and 1mm2 cross sectional area, and have the electrical resistivity (resistance) is not more than 0.017241 ohms at a temperature of 20oC, has declared 100% IACS electrical conductivity.

However, with technological advances making process copper achieved, where the level of purity copper conductor wire is much higher than in 1913, the electrical conductivity of copper wire today can reach above 100% IACS.
For Aluminium wire, regular electrical conductivity compared to the standard copper wire. According to standard ASTM B 609 for aluminum wire of the type EC grade or AA series 1350 (*), electrical conductivity ranged from 61.0 - 61.8% IACS, depending on the hardness or temper. As for the conductor wire of aluminum alloy AA 6201 series, according to standard ASTM B 3988 persaratan electrical conductivity can not be less than 52.5% IACS. 6201 Conductor Wire is usually used for the type of cable materials All Aluminium Alloy Conductor (AAAC).

In addition to the requirements of the electrical properties such as electrical conductivity above, other quality criteria must also be met include all or part of nature - the nature or conditions of the following, namely:
a. chemical composition.
b. tensile properties such as tensile strength (tensile strength) and tensile strain (elongation).
c. bending properties.
d. diameter and the allowable variation.
e. surface condition of the wire must be free from defects, and others.